So…You’re done! Put the vest on and adjust the fit straps so that the Vest is tight on you (but not uncomfortable).
Once you’re all fitted, mount the Arm next. It’s tricky, as the arm will want to swing around and do a little impromptu Dentistry on you…So be careful. I use a Velcro strap to help keep the arm in check until I’m ready to mount the sled. Use the two 2 ½” allen-head bolts with washers and Wingnuts to secure the arm. I used eye-nuts instead of Wingnuts, but each will work just as well. I jammed my allen wrench through the two eye-nuts in this picture…
Make sure there’s tension on the arm springs, then grab the Glidecam sled by the handle. You’ll notice the handle is hollow—the post at the end of the arm fits snugly inside of it. Slip the handle down until it stops…
